For full functionality of this site it is necessary to enable JavaScript.
홈 단종된 제품 GWinstek GRS-6052A 실시간 / 디지털 오실로스코프 (50Mhz, 2CH, 100MSa / s)

GWinstek GRS-6052A 실시간 / 디지털 오실로스코프 (50Mhz, 2CH, 100MSa / s)

 
GRS-6052A
 
CRT 
Type and Acceleration
6-inch CRT, 10kV
 
Illumination Front panel control
Z-axis Input Sensitivity : at least 5V 
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak)
Input Impedance : approx. 33kΩ Input Impedance : approx. 47kΩ
VERTICAL SYSTEM
Deflection Coefficient and Accuracy 1mV ~ 2mV/div ±5%, 
5mV ~ 20V/div ±3%, 
14 steps in 1-2-5 sequence
Variable Continuity 2.5 : 1 ~ min. 50V/div
Bandwidth (-3dB) 1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz		  
Vertical Mode CH1, CH2, DUAL (ALT or CHOP)
Chopper Frequency Approx. 250kHz
Sum or Difference CH1+CH2, CH1-CH2
Invert CH2
Input Impedance 1MΩ ±2%//approx. 25pF
Input Coupling AC, DC, GND
Input Voltage Max. 400V(DC+ACpeak)
HORIZONTAL SYSTEM
Sweep Time 0.2μs/div ~ 0.5s/div, 20 steps
Variable Continuity 2.5 : 1 up to 1.25s/div (uncal.)
Accuracy ±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG
Sweep Magnification x5, x10, x20
Max. Sweep Time 20ns/div (10ns/div uncal)  
ALT-MAG Function Yes
HOLD-OFF Time Variable
TRIGGER 
Trigger Mode AUTO, NORM, TV
Trigger Source VERT, CH1, CH2, LINE, EXT
Trigger Coupling AC, HFR, LFR
Trigger Slope  “+”or“ - ”polarity
ALT Trigger Yes
Indicator Trigger LED Yes
TV Sync. Separator TV-V“-”, TV-H“ - ”
Trigger Sensitivity
 
GRS-6052A
20Hz~5MHz
5MHz~40MHz
40Hz~50MHz
 
      
CH1, CH2
0.5div
1.5div
2.0div
Vert-Mode
2.0div
3.0div
3.5div
EXT
200mV
800mV
1V
TV sync. pulse more than 1 div or 200mV (EXT)
External Trigger Input 
 		 Input impedance :Approx. 1MΩ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak)
X-Y OPERATION
Input X-axis : CH1 ; Y-axis : CH2
Sensitivity 1mV/div ~ 20V/div
Bandwidth X-axis : DC ~ 500kHz (-3dB)
X-Y Phase Shift <3° from DC ~ 50kHz
DIGITAL STORAGE
Acquisition Digitizer 8 bit ADC x 2
Max. Sampling Rate
 		 500MSa/s for equivalent time sampling
100MSa/s for normal sampling
Storage Bandwidth Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz		  
Dynamic Range ±5div
Memory Length- Acquisition Memory  2k words/CH x 2, 1k words/CH(equivalent)
Memory Length- Save REF Memory 1k words/CH x 10 with back-up memory (REF0~REF9)
Memory Length- Display Memory 1k words/CH x 4 waveform(max.)
Sweep Time Equivalent: 0.2μs/div ~ 0.5μs/div
Normal Sample: 1μs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
Sweep Magnification x 5, x 10, x 20
Max.Sweep Time 10ns/div
MAG Interpolation DOTS, LINEAR
ALT-MAG Function Yes
Acquire Mode Sample, peak detect(>25ns), Envelop. Persist, Average(2~256)
Operation Mode Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop
Smoothing Function Dot joint ON/OFF selectable
Pre-Trigger Pre-trigger 0 ~10div in 0.02div steps
X-Y Operation X-axis: CH1 Y-axis: CH2
Storage Bandwidth DC~50MHz(-3dB)
Display Resolution H: 100points/div; V: 25points/div; 
X-Y: 25 x 25 points/div
SAVE/ RECALL
Panel Setting 10 sets(M0 ~M9)
Waveform 10 sets(REF0~REF9)
READOUT & CURSOR
Cursor Measurement ΔV, ΔT, 1/ ΔT
Readout Intensity Adjustable
OUTPUT SIGNAL
CH1 Signal Output Voltage : approx. 20mV/div (with 50Ω terminated) 
Bandwidth : 50Hz ~ 5MHz
Calibrator Output
 		 Voltage : 0.5V±3% 
Frequency : approx. 1kHz, square wave
INTERFACE
  RS-232C
POWER SOURCE 
  AC 100V/120V/230V±10%, 50/60Hz
DIMENSIONS & WEIGHT
  275(W) x 130(H) x 370(D) mm; Approx. 8.5kg
Details

Download datasheet

 
GRS-6052A
GRS-6032A
CRT 
Type and Acceleration
6-inch CRT, 10kV
6-inch CRT, 2kV
Illumination Front panel control
Z-axis Input Sensitivity : at least 5V 
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak)
Input Impedance : approx. 33kΩ Input Impedance : approx. 47kΩ
VERTICAL SYSTEM
Deflection Coefficient and Accuracy 1mV ~ 2mV/div ±5%, 
5mV ~ 20V/div ±3%, 
14 steps in 1-2-5 sequence
Variable Continuity 2.5 : 1 ~ min. 50V/div
Bandwidth (-3dB) 1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz		 1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz
Vertical Mode CH1, CH2, DUAL (ALT or CHOP)
Chopper Frequency Approx. 250kHz
Sum or Difference CH1+CH2, CH1-CH2
Invert CH2
Input Impedance 1MΩ ±2%//approx. 25pF
Input Coupling AC, DC, GND
Input Voltage Max. 400V(DC+ACpeak)
HORIZONTAL SYSTEM
Sweep Time 0.2μs/div ~ 0.5s/div, 20 steps
Variable Continuity 2.5 : 1 up to 1.25s/div (uncal.)
Accuracy ±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG
Sweep Magnification x5, x10, x20
Max. Sweep Time 20ns/div (10ns/div uncal) 50ns/div (10ns~40ns/div uncal)
ALT-MAG Function Yes
HOLD-OFF Time Variable
TRIGGER 
Trigger Mode AUTO, NORM, TV
Trigger Source VERT, CH1, CH2, LINE, EXT
Trigger Coupling AC, HFR, LFR
Trigger Slope  “+”or“ - ”polarity
ALT Trigger Yes
Indicator Trigger LED Yes
TV Sync. Separator TV-V“-”, TV-H“ - ”
Trigger Sensitivity
 
GRS-6052A
20Hz~5MHz
5MHz~40MHz
40Hz~50MHz
GRS-6032A
20Hz~2MHz
2MHz~20MHz
20Hz~30MHz
CH1, CH2
0.5div
1.5div
2.0div
Vert-Mode
2.0div
3.0div
3.5div
EXT
200mV
800mV
1V
TV sync. pulse more than 1 div or 200mV (EXT)
External Trigger Input 
 		 Input impedance :Approx. 1MΩ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak)
X-Y OPERATION
Input X-axis : CH1 ; Y-axis : CH2
Sensitivity 1mV/div ~ 20V/div
Bandwidth X-axis : DC ~ 500kHz (-3dB)
X-Y Phase Shift <3° from DC ~ 50kHz
DIGITAL STORAGE
Acquisition Digitizer 8 bit ADC x 2
Max. Sampling Rate
 		 500MSa/s for equivalent time sampling
100MSa/s for normal sampling
Storage Bandwidth Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz		 Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz
Dynamic Range ±5div
Memory Length- Acquisition Memory  2k words/CH x 2, 1k words/CH(equivalent)
Memory Length- Save REF Memory 1k words/CH x 10 with back-up memory (REF0~REF9)
Memory Length- Display Memory 1k words/CH x 4 waveform(max.)
Sweep Time Equivalent: 0.2μs/div ~ 0.5μs/div
Normal Sample: 1μs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
Sweep Magnification x 5, x 10, x 20
Max.Sweep Time 10ns/div
MAG Interpolation DOTS, LINEAR
ALT-MAG Function Yes
Acquire Mode Sample, peak detect(>25ns), Envelop. Persist, Average(2~256)
Operation Mode Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop
Smoothing Function Dot joint ON/OFF selectable
Pre-Trigger Pre-trigger 0 ~10div in 0.02div steps
X-Y Operation X-axis: CH1 Y-axis: CH2
Storage Bandwidth DC~50MHz(-3dB)
Display Resolution H: 100points/div; V: 25points/div; 
X-Y: 25 x 25 points/div
SAVE/ RECALL
Panel Setting 10 sets(M0 ~M9)
Waveform 10 sets(REF0~REF9)
READOUT & CURSOR
Cursor Measurement ΔV, ΔT, 1/ ΔT
Readout Intensity Adjustable
OUTPUT SIGNAL
CH1 Signal Output Voltage : approx. 20mV/div (with 50Ω terminated) 
Bandwidth : 50Hz ~ 5MHz
Calibrator Output
 		 Voltage : 0.5V±3% 
Frequency : approx. 1kHz, square wave
INTERFACE
  RS-232C
POWER SOURCE 
  AC 100V/120V/230V±10%, 50/60Hz
DIMENSIONS & WEIGHT
  275(W) x 130(H) x 370(D) mm; Approx. 8.5kg

 

  • 품질 보증
  • 공인 보증
  • 집으로 배달
  • 간단하게 거래하기

할인과 정보를 받기 위해 등록하기

EMIN VIET NAM

EMIN 하노이 - 베트남:

주소: No 203 Nguyen Ngoc Vu, Yen Hoa Ward, Ha Noi City, Vietnam

전화번호: +84 (24) 62923267

Hotline: +84 969950220

팩스: +84 (024) 35 190 360 ; 이메일: hn@emin.vn


EMIN 호찌민 - 베트남:

주소: No 110A Chu Van An, Binh Thanh Ward, Ho Chi Minh City, Vietnam

전화번호 : +84 (28) 3811 96 36 - +84 (28) 3811 93 59 - +84 (28) 3811 62 13 

팩스: +84 (28) 3811 95 45 ; 이메일: hcm@emin.vn


EMIN 박닌 - 베트남

주소: CL13-39 Him Lam Green Park, Vo Cuong Ward, Bac Ninh Province, Vietnam

팩스: +84 222 730.39.68 - +84 (222)730.40.68

이메일:  bn@emin.vn


EMIN 하이퐁 - 베트남

주소: No 473 Pho Moi, Thuy Nguyen Ward, Hai Phong City, Viet Nam

전화번호:: +84 225 730 03 89

이메일:  hp@emin.vn


EMIN 다낭 - 베트남:

주소: No 622, Đien Bien Phu Str, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City, Vietnam

전화번호: +84 (236) 374 77 11 - +84 (236) 374 77 22 - +84 (236) 374 77 33

팩스: +84 (236) 374 77 44 ; 이메일: dn@emin.vn


EMIN 동나이 - 베트남

주소: No 458 Dong Khoi, Tan Hiep Ward, Dong Nai Province, Viet Nam

Hotline: +84345.689.536

이메일: dnai@emin.vn


EMIN 민간조직

주소: 18 Dunsfold Drive Singapore 359380

전화번호: + 84916508932 팩스: +65 67258365

이메일: sales@emin.asia; 웹사이트: https://emin.asia


EMIN Myanmar Co., Ltd

주소: No. (511/B), Waizayantar Road, 4 Ward, South Okkalapa Township, Yangon 11091, Myanmar

전화번호: +959782793523, +959955678481 ; 웹사이트: https://emin.com.mm


EMIN LAO SOLE Co.,LTD

주소: Room 701 at 7th Floor, Vietinbank Building, 286 Lanexang Road, Hatsadinua, Chanthaboundly, Vietiane Capital, Lao PDR

전화번호: 020 95658555 ; 020 52525165 

이메일: sales@emin.com.la; 웹사이트: https://emin.com.la


PT. EMIN Indonesia

Add: Graha Irama Building, 6th Floor, Block A, Ji.HR Rasuna Said Blok X-1, Kav 1-2m Kuningan, Setiabudi, South Jakata, Indonesia, 12950 
이메일: sales@emin.asia

웹사이트: https://emin.co.id

우리와 접촉
웹 연결
certification